{"id":4283,"date":"2026-10-28T14:29:56","date_gmt":"2026-10-28T14:29:56","guid":{"rendered":"https:\/\/backup.fanoosksa.com\/?post_type=product&#038;p=4283"},"modified":"2026-10-30T10:38:31","modified_gmt":"2026-10-30T10:38:31","slug":"pvc-schedule-40-90-elbow-socket-type-ends","status":"publish","type":"product","link":"https:\/\/backup.fanoosksa.com\/ar\/product\/pvc-schedule-40-90-elbow-socket-type-ends\/","title":{"rendered":"PVC Schedule 40 90\u00b0 Elbow, Socket-Type Ends"},"content":{"rendered":"<h2>PVC Schedule 40 90\u00b0 Elbow \u2013 Socket-Type Ends (ASTM D2466)<\/h2>\n<h3>PVC Schedule 40 90 Elbow: Product Overview<\/h3>\n<p dir=\"rtl\">\u0643\u0648\u0639 \u0632\u0627\u0648\u064a\u0629 \u0633\u064340 \u0627\u0628\u064a\u0636<\/p>\n<p>The <strong>PVC Schedule 40 90 Elbow<\/strong> (90-degree socket elbow) is an injection-molded fitting made from rigid polyvinyl chloride. Both ends are sockets: the pipe is inserted into each socket and bonded with primer and solvent cement to form a permanent, leak-tight connection. The smooth bore keeps friction loss low, and the wall meets Schedule 40 pressure requirements.<\/p>\n<p>The fitting is white, which identifies the Schedule 40 range. Gray fittings are usually Schedule 80. Do not mix Schedule 40 and Schedule 80 fittings in one system without checking joint compatibility.<\/p>\n<h2>Applications of the PVC Schedule 40 90 Elbow<\/h2>\n<ul>\n<li>Potable water supply<\/li>\n<li>Irrigation<\/li>\n<li>Pool and spa installations<\/li>\n<li>Chilled water systems<\/li>\n<li>Industrial fluid lines<\/li>\n<\/ul>\n<h2>Standards for the PVC Schedule 40 90 Elbow<\/h2>\n<ul>\n<li>ASTM D2466: Schedule 40 PVC fittings<\/li>\n<li>ASTM D1784: rigid PVC, Type I, cell class 12454<\/li>\n<li>ASTM D2564 solvent cement, ASTM F656 primer, ASTM D2855 joining (ASTM F3328 one-step, ASTM F1970 joining systems)<\/li>\n<li>NSF\/ANSI 61, NSF\/ANSI 14 and NSF\/ANSI 372 for potable water, where marked<\/li>\n<li>ANSI\/ASME B1.20.1 for threaded transitions<\/li>\n<\/ul>\n<h2>Socket dimensions (inch)<\/h2>\n<table>\n<thead>\n<tr>\n<th>Size<\/th>\n<th>Entrance \u00d8<\/th>\n<th>Bottom \u00d8<\/th>\n<th>Min. depth<\/th>\n<th>Min. wall<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1\/2<\/td>\n<td>0.848 \u00b1 0.004<\/td>\n<td>0.836 \u00b1 0.004<\/td>\n<td>0.688<\/td>\n<td>0.109<\/td>\n<\/tr>\n<tr>\n<td>3\/4<\/td>\n<td>1.058 \u00b1 0.004<\/td>\n<td>1.046 \u00b1 0.004<\/td>\n<td>0.719<\/td>\n<td>0.113<\/td>\n<\/tr>\n<tr>\n<td>1<\/td>\n<td>1.325 \u00b1 0.005<\/td>\n<td>1.310 \u00b1 0.005<\/td>\n<td>0.875<\/td>\n<td>0.133<\/td>\n<\/tr>\n<tr>\n<td>1-1\/4<\/td>\n<td>1.670 \u00b1 0.005<\/td>\n<td>1.655 \u00b1 0.005<\/td>\n<td>0.938<\/td>\n<td>0.140<\/td>\n<\/tr>\n<tr>\n<td>1-1\/2<\/td>\n<td>1.912 \u00b1 0.006<\/td>\n<td>1.894 \u00b1 0.006<\/td>\n<td>1.094<\/td>\n<td>0.145<\/td>\n<\/tr>\n<tr>\n<td>2<\/td>\n<td>2.387 \u00b1 0.006<\/td>\n<td>2.369 \u00b1 0.006<\/td>\n<td>1.156<\/td>\n<td>0.154<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Pressure and weight at 23 \u00b0C<\/h2>\n<table>\n<thead>\n<tr>\n<th>Size<\/th>\n<th>Pipe rating (bar)<\/th>\n<th>Fitting planning (bar)<\/th>\n<th>Weight (g)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1\/2<\/td>\n<td>41.4<\/td>\n<td>24.8<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>3\/4<\/td>\n<td>33.1<\/td>\n<td>19.9<\/td>\n<td>34<\/td>\n<\/tr>\n<tr>\n<td>1<\/td>\n<td>31.0<\/td>\n<td>18.6<\/td>\n<td>48<\/td>\n<\/tr>\n<tr>\n<td>1-1\/4<\/td>\n<td>25.5<\/td>\n<td>15.3<\/td>\n<td>86<\/td>\n<\/tr>\n<tr>\n<td>1-1\/2<\/td>\n<td>22.8<\/td>\n<td>13.7<\/td>\n<td>118<\/td>\n<\/tr>\n<tr>\n<td>2<\/td>\n<td>19.3<\/td>\n<td>11.6<\/td>\n<td>188<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Temperature de-rating: allowable fitting pressure (bar)<\/h2>\n<table>\n<thead>\n<tr>\n<th>Size<\/th>\n<th>23 \u00b0C<\/th>\n<th>27 \u00b0C<\/th>\n<th>32 \u00b0C<\/th>\n<th>38 \u00b0C<\/th>\n<th>43 \u00b0C<\/th>\n<th>49 \u00b0C<\/th>\n<th>54 \u00b0C<\/th>\n<th>60 \u00b0C<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Factor<\/td>\n<td>1.00<\/td>\n<td>0.88<\/td>\n<td>0.75<\/td>\n<td>0.62<\/td>\n<td>0.51<\/td>\n<td>0.40<\/td>\n<td>0.31<\/td>\n<td>0.22<\/td>\n<\/tr>\n<tr>\n<td>1\/2<\/td>\n<td>24.8<\/td>\n<td>21.8<\/td>\n<td>18.6<\/td>\n<td>15.4<\/td>\n<td>12.7<\/td>\n<td>9.9<\/td>\n<td>7.7<\/td>\n<td>5.5<\/td>\n<\/tr>\n<tr>\n<td>3\/4<\/td>\n<td>19.9<\/td>\n<td>17.5<\/td>\n<td>14.9<\/td>\n<td>12.3<\/td>\n<td>10.1<\/td>\n<td>7.9<\/td>\n<td>6.2<\/td>\n<td>4.4<\/td>\n<\/tr>\n<tr>\n<td>1<\/td>\n<td>18.6<\/td>\n<td>16.4<\/td>\n<td>14.0<\/td>\n<td>11.5<\/td>\n<td>9.5<\/td>\n<td>7.4<\/td>\n<td>5.8<\/td>\n<td>4.1<\/td>\n<\/tr>\n<tr>\n<td>1-1\/4<\/td>\n<td>15.3<\/td>\n<td>13.5<\/td>\n<td>11.5<\/td>\n<td>9.5<\/td>\n<td>7.8<\/td>\n<td>6.1<\/td>\n<td>4.7<\/td>\n<td>3.4<\/td>\n<\/tr>\n<tr>\n<td>1-1\/2<\/td>\n<td>13.7<\/td>\n<td>12.0<\/td>\n<td>10.2<\/td>\n<td>8.5<\/td>\n<td>7.0<\/td>\n<td>5.5<\/td>\n<td>4.2<\/td>\n<td>3.0<\/td>\n<\/tr>\n<tr>\n<td>2<\/td>\n<td>11.6<\/td>\n<td>10.2<\/td>\n<td>8.7<\/td>\n<td>7.2<\/td>\n<td>5.9<\/td>\n<td>4.6<\/td>\n<td>3.6<\/td>\n<td>2.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Maximum continuous service about 60 \u00b0C. For hot water, use CPVC.<\/p>\n<h2>How to Install a PVC Schedule 40 90 Elbow<\/h2>\n<ol>\n<li>Cut the pipe square, deburr and wipe clean.<\/li>\n<li>Apply primer to the inside of the socket and outside of the pipe end.<\/li>\n<li>Apply solvent cement to the same surfaces.<\/li>\n<li>Push the pipe fully into the socket while wet, with a quarter turn.<\/li>\n<li>Do not pressurize until the cement has cured; follow the cement maker\u2019s cure schedule.<\/li>\n<li>Work in a ventilated area, away from heat and flames.<\/li>\n<\/ol>\n<h2>Testing<\/h2>\n<p>Burst test per ASTM D2466 \/ ASTM D1599. Long-term rating per ASTM F2261. Hydrostatically test the installed system with water to project specification and local code.<\/p>\n<p><strong>Safety warning:<\/strong> Do not test or operate PVC pipe and fittings with compressed air or other compressed gas. Use water for pressure testing.<\/p>\n<p><em>Pressure values are general planning figures (fitting about 60% of the Schedule 40 pipe rating at 23 \u00b0C, non-shock water service), not guaranteed ratings. Confirm with the specific product data and a qualified engineer.<\/em><\/p>\n<h2>Why Choose the PVC Schedule 40 90 Elbow?<\/h2>\n<p>The PVC Schedule 40 90 Elbow is one of the most used fittings in pressure pipework, because every pipe run eventually has to turn a corner. Choosing a fitting made to a recognised standard means the socket dimensions match Schedule 40 pipe from any compliant producer, so joints fit correctly the first time.<\/p>\n<ul>\n<li><strong>Standard dimensions:<\/strong> sockets made to ASTM D2466, so the pipe enters to the correct depth with the right clearance for cement.<\/li>\n<li><strong>Permanent joints:<\/strong> solvent-cement welding creates a single, leak-tight unit with no threads or gaskets to maintain.<\/li>\n<li><strong>Low friction loss:<\/strong> the smooth bore helps keep flow and pump energy efficient.<\/li>\n<li><strong>Corrosion resistant:<\/strong> PVC does not rust or scale, which suits water, irrigation and many process lines.<\/li>\n<li><strong>Wide size range:<\/strong> available from 1\/2 inch to 8 inch, with SKU 30E9 for every size.<\/li>\n<\/ul>\n<h2>Frequently Asked Questions<\/h2>\n<h3>What is the difference between Schedule 40 and Schedule 80?<\/h3>\n<p>Schedule 80 fittings have thicker walls and higher pressure capacity, and are usually gray. The PVC Schedule 40 90 Elbow is white and is used for most general pressure work. Do not mix the two without checking joint compatibility.<\/p>\n<h3>Can the PVC Schedule 40 90 Elbow be used for hot water?<\/h3>\n<p>PVC is rated for continuous service up to about 60 \u00b0C, with lower allowable pressure as temperature rises. For hot water lines, choose CPVC instead.<\/p>\n<h3>How long should I wait before pressure testing?<\/h3>\n<p>Follow the cement manufacturer&#8217;s cure schedule. Larger sizes and cooler weather need longer curing, and testing should always be done with water, never compressed air.<\/p>\n<h2>Order the PVC Schedule 40 90 Elbow from Fanoos<\/h2>\n<p>Fanoos AlHadeeth Trading supplies plumbing and drainage products from Jeddah to projects across Saudi Arabia, with more than 18 years of experience. Browse our <a href=\"https:\/\/backup.fanoosksa.com\/ar\/\">full product range<\/a> or <a href=\"https:\/\/backup.fanoosksa.com\/ar\/contact\/\">contact our sales team<\/a> for availability and a project quotation for the PVC Schedule 40 90 Elbow. For background on the material, read this <a href=\"https:\/\/en.wikipedia.org\/wiki\/Polyvinyl_chloride\" target=\"_blank\" rel=\"noopener\">introduction to PVC (polyvinyl chloride)<\/a>.<\/p>","protected":false},"excerpt":{"rendered":"<p>Injection-molded rigid PVC 90\u00b0 elbow with solvent-weld sockets on both ends, made to ASTM D2466 for Schedule 40 pressure systems. Available from 1\/2 to 8 inch.<\/p>","protected":false},"featured_media":4315,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[61],"product_tag":[],"class_list":["post-4283","product","type-product","status-publish","has-post-thumbnail","product_cat-plastic-pipes-fittings","first","instock","shipping-taxable","purchasable","product-type-variable","has-default-attributes"],"acf":[],"_links":{"self":[{"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/product\/4283","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/comments?post=4283"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/media\/4315"}],"wp:attachment":[{"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/media?parent=4283"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/product_brand?post=4283"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/product_cat?post=4283"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/backup.fanoosksa.com\/ar\/wp-json\/wp\/v2\/product_tag?post=4283"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}