Stainless Steel Recessed Floor Drain 150×150 mm – Tile Insert (FD-7010SR)

Stainless Steel Recessed Floor Drain 150×150 mm – Saudi Cast FD-7010SR Tile Insert Drain

The Stainless Steel Recessed Floor Drain 150×150 mm is a tile-insert floor drain from Saudi Cast, model FD-7010SR. Instead of a visible grating, it has a square recessed cover that holds a piece of the same floor tile, so the drain almost disappears into the floor. Water drains through a narrow 5 mm slot around the tile, leaving a clean, modern finish in bathrooms, wet rooms and other tiled areas. Fanoos supplies this Stainless Steel Recessed Floor Drain in a standard stainless steel finish and in black, for projects across Jeddah and the wider Kingdom of Saudi Arabia.

Stainless Steel Recessed Floor Drain: Product Overview

Architects and interior designers often want drainage that does not interrupt the floor pattern. A conventional floor drain with a visible grate breaks the line of the tiles, while a recessed, tile-insert drain lets the tile continue right across the drain. The FD-7010SR series is designed for exactly this purpose. Its stainless steel body has a bottom outlet, and its square recessed cover is filled on site with a tile cut to size, so the drain blends into the surrounding floor.

Because the body and cover are made of stainless steel, the drain resists corrosion from water, cleaning chemicals and everyday use. The 150×150 mm size is the most popular choice for bathrooms and shower areas, giving enough drainage capacity while keeping the visible slot small and neat.

Key Features of the Stainless Steel Recessed Floor Drain

• Tile-insert design: the square recessed cover takes a floor tile, so the drain matches the floor finish.
• Stainless steel construction: corrosion-resistant body and cover for long life in wet areas.
• 150×150 mm size: suitable for bathrooms, showers and most tiled floors.
• Narrow 5 mm drainage slot: water drains discreetly around the edge of the tile.
• 20 mm recess depth: room for the tile and adhesive bed inside the cover.
• Bottom outlet: 4 inch hub outlet with no-hub connection.
• Two finishes: standard stainless steel or black, to suit the interior design.
• Genuine Saudi Cast product: supplied by Fanoos, a Saudi Cast verified original products dealer.

Stainless Steel Recessed Floor Drain Specifications

The data below follows the manufacturer’s published information for the FD-7010SR from Saudi Cast, a Watts brand.

Choosing the Right Size

The FD-7010SR series is made in three square sizes. The 100×100 mm version suits small areas with light water flow, such as toilets and utility corners. The 150×150 mm Stainless Steel Recessed Floor Drain on this page is the standard choice for bathrooms, showers and wet rooms. The 200×200 mm version is used where larger areas drain to one point, such as wide shower zones, changing rooms and commercial washrooms. When choosing, consider the floor area, the expected water flow and the tile size, so the cut tile in the cover lines up neatly with the floor pattern.

Applications of the Stainless Steel Recessed Floor Drain

• Bathrooms and walk-in showers in villas, apartments and hotels
• Wet rooms and accessible bathrooms with level floors
• Hotel guest rooms, spas, gyms and changing rooms
• Hospitals, clinics and other buildings that need easy-to-clean floors
• Lobbies, corridors and service areas with tiled finishes
• Any tiled floor where a visible grating would spoil the design

How to Install a Stainless Steel Recessed Floor Drain

1. Plan the drain position on the drawings and make sure the floor falls towards it.
2. Connect the 4 inch bottom outlet to the drain pipe and fix the body at the correct height for the finished floor.
3. Lay the screed with a fall towards the drain, and install the waterproofing according to the system used on site.
4. Cut a tile to fit the recessed cover and bed it with suitable tile adhesive, keeping the top level with the surrounding floor.
5. Tile the floor around the drain, keeping the 5 mm slot clear so water can enter.
6. Remove any adhesive or grout from the slot, then test the drain with water before handover.

Always follow the manufacturer’s drawing and the project specification. Our team can provide the FD-7010SR drawing on request.

Cleaning and Maintenance

A Stainless Steel Recessed Floor Drain is easy to look after. Lift the tiled cover from time to time to remove hair and debris, rinse the body, and refit the cover. Clean the stainless steel with mild detergent and water, and avoid abrasive pads or harsh chemicals that could mark the finish. Keeping the slot clear ensures the floor continues to drain quickly.

Why Buy from Fanoos?

Fanoos AlHadeeth Trading has supplied plumbing and drainage products to contractors, consultants and project owners for more than 18 years. As a Saudi Cast verified original products dealer, we provide genuine products with proper documentation, reliable delivery and support from enquiry to handover. You can also see the full Recessed Floor Drains 7010SR range on our website.

Frequently Asked Questions

What is a recessed floor drain?

A recessed floor drain has a cover with a shallow tray that holds a floor tile. Water drains through a narrow gap around the tile, so the drain is almost invisible.

Which tiles can be used in the cover?

The Stainless Steel Recessed Floor Drain accepts most floor tiles that fit within the 20 mm recess together with the adhesive bed. Check the tile thickness before installation.

Is the black finish the same size?

Yes. The black version (SKU 105SS.RC.15B) has the same 150×150 mm size and outlet as the standard stainless steel version.

Can I order other sizes?

Yes. Ask our team about the 100×100 mm and 200×200 mm sizes of the same series.

Request a Quote

Need a Stainless Steel Recessed Floor Drain for your project? Contact our sales team with your sizes, finish, quantities and delivery location, or browse our complete range of plumbing and drainage products.